一、Overview of straw disassembling and kneading machine：

Low temperature pulping technology is the development trend in the future.，Energy consumption of heat source can be saved、Improve fiber strength，And the fiber yield is improved.Hammer-type stalk disassembling machineIt is a dry material preparation equipment developed by our company's technicians，It is a coarse material preparation equipment for clean pulping.

二、Working principle of straw disassembling and kneading machine：

The principle of straw disassembling and kneading equipment is to disassemble, shred and refine bamboo chips, wood chips, straw, wheat straw, reed and other raw materials by using the beating and kneading power of hammer。The hammer piece is installed on the intermediate transmission rotor, and the centrifugal force generated by the high-speed rotation of the rotor makes the hammer piece radiate and spread around, generating a strong and gentle beating and kneading force, and the raw materials are beaten and torn to separate wires in cooperation with the anti-kneading effect of the lining plate similar to the clothes rubbing plate inside the equipment。The lower part of the equipment is a filter sieve plate, and the size and fineness of the discharge are controlled by the size of the sieve plate aperture. Large mesh leads to coarse discharge and small mesh leads to fine discharge.When it is used for grass kneading, it is necessary to configure high pressure induced draft fan to pull out material to prevent the material from being kneaded for too long to damage the fiber. Equipped with pulling fan to speed up the discharging speed and reduce the internal temperature of the equipment.

三、Advantages and characteristics of equipment：

The equipment adopts double motor drive to ensure the stability of the equipment current.Suitable for a variety of raw materials: one is to decompose bamboo pieces, wood pieces;Second, dismantling the straw, the straw mixed in with the internal dust and core white membrane separation.Destroying the light film of wheat straw skin is beneficial to water absorption.The disassembled raw material has fast water absorption speed and short cooking and ripening time, which is convenient for subsequent entry into the abrasive of the high concentration pulping machine.

四、Equipment model parameter list：