PRODUCT
Dihui Environmental Protection
- contacts:Mr. Zhang
- Tel:177-5364-5188
- Add:No. 118, Houhuangtuan Village, Mizhou East Road, Mizhou Street, Zhucheng City, Weifang City, Shandong Province, 178 meters north of Houhuangtuan Industrial Park
一．Introduction to Double Vortex Hydraulic Crusher:
JHSS Double vortex hydraulic pulper is designed with reference to the principle of hydraulic shear vortex, which saves more than 30% electricity than single vortex hydraulic pulper.。The double eddy current hydraulic pulping machine adopts two sets of transmission systems, two sets of sieve plates and two sets of pulping impellers, which are installed in parallel and at different speeds in the same direction, which increases the hydraulic eddy current shear force and impact force.，Promote waste paper to decompose and hydrate rapidly under the action of hydraulic shear force generated by high-speed rotation of impeller.。During the operation of the equipment, the waste paper is always in a high-speed countercurrent, so that the friction between the paper and the paper and between the fiber and the fiber, combined with impeller beating and hydraulic impact and soaking, speeds up the decomposition speed of the paper and increases the output. The power consumption is reduced and the production efficiency is improved。
This machine is a popular product of small and medium-sized paper manufacturers because of its novel and reasonable design and simple operation.
二．Equipment specifications and parameters：
name parameter category |
ZHSS |
ZHSS |
ZHSS |
ZHSS |
ZHSS |
Nominal volume（m3） | 2.5 | 5 | 8 | 10 | 15 |
Production capacity （t/d） | 30-40 | 40-80 | 50-100 | 90-160 | 100-200 |
Pulping concentration（%） | 2-6 | 2-6 | 2-6 | 2-6 | 2-6 |
Sieve hole diameter（mm） | 4-12 | 4-16 | 4-18 | 4-20 | 4-20 |
Diameter of discharge pipe （DN） | 100×2 | 150×2 | 200×2 | 250×2 | 250×2 |
Motor power（kw） | 15-22 | 37-55 | 45-55 | 55-75 | 75-110 |
Note: the diameter of sieve hole can be made according to the needs of users.
三．Structure composition and working principle:
This equipment includes: feeding port, support legs, barrel body, left and right impellers, sieve plate, slurry chamber, left and right transmission assemblies, and main engine; Composed of motor pulleys, motors, etc.
The main pulping mechanism relies on two sets of left and right drive impellers.
The left and right impellers are not on the same central axis and rotate in the same direction but at different speeds. During pulping, the slurry undergoes radial counter current motion, and under the high-speed rotation of the impeller, the mixed slurry is subjected to impact from the impeller while rotating in the same direction; Shear between impeller and sieve plate; The crushing of the slurry blocking plate; Friction between fibers; The impact and moisturizing processes of hydraulic eddies cause rapid disintegration and hydration of paper materials. Under the action of force, heavy matter is pushed to the middle of the bucket and falls into the sediment outlet, where it is discharged from the sediment trough in the middle. Qualified fibers pass through the sieve plate and enter the next process.
