1、 Introduction to Equipment Technical Advantages:

The laminated sludge dewatering machine is widely used for sludge dewatering treatment in various industries, and its technical advantages are manifested as:

1) Wide applicability: It can be widely used for sludge dewatering in various industries; Suitable for high and low concentration sludge; Suitable for various types of sludge with high and low viscosity, especially oily sludge.

2) Equipment is not prone to clogging: The unique dynamic and fixed ring filter seam structure makes the equipment less prone to clogging, eliminating the need for extensive cleaning to prevent filter seam clogging, completely reducing the amount of flushing water, reducing the burden of internal circulation, and solving the troubles caused by traditional dehydration equipment clogging to enterprises.

3) Continuous automatic operation: The laminated sludge dewatering machine adopts automatic control from sludge inlet, injection of liquid medicine, and discharge of sludge cake. It is linked with the foaming machine, sludge inlet pump, dosing pump, etc. through an electric control cabinet, without the need for personnel to operate the equipment, and there will be no blockage during operation. It can operate continuously without human intervention for 24 hours.

4) The operating cost is very low: the equipment adopts an integrated overall design and low-speed spiral extrusion technology, so the main drive motor is very small and energy-saving. Very little water is used for flushing; It can achieve 24-hour unmanned operation, saving labor costs.

5) No secondary pollution: The speed of the spiral shaft is about 2-3 revolutions per minute, with no vibration and very low noise; Its laminations have self-cleaning function and will not cause blockage problems. Only a small amount of water is needed for flushing. In addition, the sludge runs at such a slow working state, and the odor does not spread, thus creating a very good operating environment!

2、 Comparative advantages:

1. The belt filter press consumes a large amount of water for washing the net, and the rubber rollers wear out quickly. The net belt adjustment system works frequently, and the net belt wears out quickly. The bearings are afraid of water damage, which is inevitable. Due to its large footprint, the sludge dewatering process is inevitably exposed to external odors. Easy to malfunction, cannot do without personnel supervision.

2. The sludge centrifuge is equipped with high power, high noise, high sludge moisture content, and high maintenance costs.

3. Although the moisture content of the sludge produced by the plate and frame filter press is low, it cannot continuously produce sludge, resulting in high operating costs, large investment, and high labor intensity for workers and machinery. It is recommended not to use hazardous waste sludge that does not contain heavy metals.

4. The laminated sludge dewatering machine has a small footprint, low noise, hygienic environment, small power configuration, 24-hour unmanned operation, long service life, and does not require dedicated personnel to supervise the work.

3、 Equipment usage site: